Electrical Mechanical Remediation
Field Installation Process Testing

High-Level Waste Bogies


Designed, fabricated, and tested standardized bogies (four-wheeled trolleys that travel on a crane rails) and associated equipment (drive systems, control panels, tools). Also provided equipment to recover a failed bogie to a safe work area without the need for personnel to enter a radiological/contamination zone.

Waste Treatment Plant

Hanford Site

Richland, WA

Quality Level:

NQA-1

 
 

Portable Manipulator System


Designed and built a fixed and a mobile system to deploy manipulators, hoists, and other tools to remotely perform maintenance inside the target core. Commercial, off-the-shelf equipment was modified to cost effectively meet the government's needs.

Spallation Neutron Source Facility

Oak Ridge, TN

Quality Level: 10CFR830.120
 
 

Fluidic Components


Built 200 L50M jet pump nozzles used for transferring radioactive sludge for testing prior to processing.   Components were made from 316L stainless steel and polished to allow for easy decontamination.   The components were built to exacting tolerances and rigorous quality standards.

Waste Treatment Plant

Hanford Site

Richland, WA

Quality Level:

NQA-1

 
 

Puck Drum Lift


Designed, fabricated, tested, and delivered two Puck Drum Lifts for the Advanced Mixed Waste Treatment Project. The puck drum elevator lifts 100 gallon drums containing sorted/repackaged mixed radioactive waste between a transfer conveyor and the bagless transfer ports of a post-compact glovebox.

Advanced Mixed Waste Treatment Project

Idaho Falls, ID

Quality Level: 10CFR830, Part A
 
 

324 Building Remote Handling/Disassembly Tooling and Components


Designed, fabricated, and tested remote handling and disassembly tooling/components and hot cell modifications necessary for hot cell repackaging of commercial spent nuclear fuel for the purpose of long-term dry storage.

Spent Nuclear Fuel Project

Hanford Site

Richland, WA

Quality Level:

NQA-1

 
 
 

Airlock A-Cell Bridge Hoist


Designed, built, and tested a custom low-headroom hoist to remotely lift pressurized water reactor, boiling water reactor (BWR), and consolidated BWR spent nuclear fuel assemblies from a storage location within a hot cell.

Spent Nuclear Fuel Project

Hanford Site

Richland, WA

Quality Level:

NQA-1

 

 

Contact: Dena Notaras

(509) 943-6706